Schleifen
Assembly
9.3 Setting gearbox clearance
1
Photo shows similar product
C-SC_CSSM
Version 1.0_Vorlage 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1. Perform a test run.
2. Check gearbox clearance by turning the shaft (1).
3. If there is no gearbox clearance, a second disc must be
placed between the bearing plate and the gearbox
housing.
34130583060
Printed in Germany
11.07.2023
Page 52 of 70