National Instruments NI ISC-1772C User Manual page 73

Appendix B Camera Attributes
Attribute Name
PixelFormat
PulseGeneratorDelay
PulseGeneratorDelayEdgeCounts
PulseGeneratorDelaySource
PulseGeneratorDuration
PulseGeneratorEdgeActivation
PulseGeneratorEnable
PulseGeneratorMode
PulseGeneratorPolarity
PulseGeneratorSelector
PulseGeneratorTriggerActivation
PulseGeneratorTriggerSource
PulseGeneratorTriggerSoftware
ReverseX
NI 177x Smart Camera User Manual
Table B-1. Camera Attributes (Continued)
Data Type Range
Enum Mono8,
BGRA8Packed
DBL —
U32 0 to 4294967295
Enum Internal Clock,
Input 0 Edges,
Input 1 Edges,
Input 2 Edges,
Input 3 Edges,
DBL 0 to 68719476
Enum Rising Edge,
Falling Edge
Bool —
Enum Single Pulse,
Rearmed Pulse,
Pulse Train
Enum Active High,
Active Low
Enum Pulse Generator 0,
Pulse Generator 1,
Pulse Generator 2,
Pulse Generator 3
Enum Rising Edge,
Falling Edge
Enum Immediate,
Software, Input 0,
Input 1, Input 2,
Input 3
Command —
Boolean —
B-4
Unit Description
— Gets or sets the pixel format of the
source sensor. Color pixel formats
are only available for NI 177xC
Smart Cameras.
µs Specifies the delay of the selected
pulse generator.
Edge Specifies the delay of the pulse
Counts generator.
— Specifies the counter source for
the pulse generator delay.
µs Specifies the duration of the
generated pulse.
— Specifies the activation for the
pulse generator delay, when
configured for a delay.
— Enables the specified pulse
generator.
— Gets or sets the mode of the
selected pulse generator.
— Gets or sets the polarity of the
sepected pulse generator.
— Specifies the pulse generator to
configure. Each pulse generator
maps to the output line with the
same index.
— Gets or sets the trigger activation
of the selected pulse generator.
— Gets or sets the trigger source of
the selected pulse generator.
— Sends a software trigger to the
pulse generator.
— Flips the image horizontally,
along the Y axis.
ni.com