Prior To Connecting; Installation; After Connecting - Whirlpool AMW 528 Instructions For Use Manual

PRIOR TO CONNECTING

Check that the voltage on the rating plate
corresponds to the voltage in your home.
Do not remove the microwave inlet
protection plates located on the side of
the oven cavity wall. They prevent grease &
food particles from entering the microwave
inlet channels.
Ensure the oven cavity is empty before
mounting.
Ensure that the appliance is not
damaged. Check that the oven door closes
fi rmly against the door support and that the
internal door seal is not damaged. Empty
the oven and clean the interior with a soft,
damp cloth.
Do not operate this appliance if it has
a damaged mains cord or plug, if it is not
working properly, or if it has been damaged
or dropped. Do not immerse the mains cord
or plug in water. Keep the cord away from
hot surfaces. Electrical shock, fi re or other
hazards may result.
Follow the supplied separate mounting
instructions when installing the appliance.
2

INSTALLATION

AFTER CONNECTING

The oven can be operated only if the oven
door is fi rmly closed.
The earthing of this appliance is
compulsory. The manufacturer will accept
no responsibility for injury to persons,
animals or damage to objects arising from
the non-observance of this requirement.
In the case of a permanent connection,
the appliance should be installed by a
qualifi ed technician.
The manufacturers are not liable for any
problems caused by the user's failure to
observe these instructions.