Table of Contents
Advertisement
2
1
1. Turn the multifunction knob to the Auto
position.
2. Press the Auto button to select the
desired auto function.
3. Turn the +/- knob to choose desired food
class.
4. Press the Select button (default weight is
displayed).
5. Turn the +/- knob to set the weight of the
food.
6. Press the Start button.
(A)
Adjusting doneness
When using the Auto functions (except the Jet Defrost function), you also have the
possibility to personally control the end result through the Adjust doneness feature.
This feature enables you to achieve higher or lower end temperature or longer and
shorter time.
By choosing one of the Auto functions you choose the standard setting. This setting
normally gives you the best result. Perhaps the food you heated became too warm to
eat at once. You can easily adjust this before you use that function the next time. This
is done by selecting a Hi or Low level with the +/- knob.
Turn the +/- knob to set your Personal Preference.
+
+ increases the end temperature.
-
- decreases the end temperature.
Note:
The Personal Preference can only be set or altered during the fi rst 20 seconds of
operation.
Auto forced air Combi: The Personal Preference can only be set or altered during the
fi rst 20 seconds of the preheat period (food classes 3, 4 and 5).
AUTO FUNCTIONS
4
6
3
(A)
5
If the weight is lesser or greater than
recommended weight:
Use the "Cook and reheat with microwaves"
to cook / defrost the food.
Note: In Auto Forced Air Combi, some of
the programs do not have any weight input.
Frozen foods:
If the food is warmer than
deep-freeze temperature
(-18°C), choose lower weight of
the food.
If the food is colder than deep-
freeze temperature (-18°C),
choose higher weight of the food.
The auto functions on this oven need
to know the net weight of the food. The
oven will then automatically calculate
the needed time to fi nish the defrost /
cooking procedure.
13
Advertisement
Table of Contents
