Table of Contents
Advertisement
PRODUCT ASSEMBLY
PREPARING THE BLENDER FOR USE
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
Before first use
Before using your Blender for the first time, wipe the Blender Base with a warm, damp cloth,
then wipe clean with a damp cloth. Dry with a soft cloth. Wash the Blender Jar, Lid, Tamper,
and Ingredient-Measuring Cap in warm, sudsy water (see the "Care and Cleaning" section).
Rinse parts and wipe dry.
1.
Before using the Blender, be sure the countertop beneath the Blender and surrounding
areas are dry and clean. Then, plug the Blender into an earthed outlet.
2.
The main power switch is on the back of the Blender Base. Flip the Power switch to the On
position. The Status Indicator Light above the Start/Stop Toggle Switch
flash, indicating that the Blender is in Standby mode. The Blender is now ready to operate.
PRODUCT USAGE
1.
Put the items to blend into the Blender Jar. Add liquids first, then soft foods, then leafy
greens, and ice or frozen items last.
NOTE: Do not fill Blender Jar past the topmost measurement mark, especially when
blending liquids.
2.
Make sure that the Lid is fully secured on the Blender Jar. Next, place the Blender Jar on
the Base, making sure that it is fully aligned on the Jar Pad.
3.
Flip the Start/Stop Toggle Switch
Status Indicator Light will now be solid.
4.
Turn the Control Dial to your desired speed. See the "Blender Function Guide" for more
information.
5.
Use the Tamper accessory as needed for optimal blending performance. Remove the
Ingredient-Measuring Cup/Cap only, and leave the Lid in place. Stir or press contents
down towards the Blade. When you are finished, replace the Ingredient- Measuring Cup/
Cap to the Blender Jar Lid before resuming blending.
6.
The Pulse function may also be used on its own as a separate blending function while the
Blender is in Standby mode.
7.
After blending, flip the Start/Stop Toggle Switch
to a complete stop before removing the Lid and pouring your blended ingredients.
6
WARNING
Electrical Shock Hazard
up or down to begin operation of the Blender. The
up or down. Allow the Blender to come
will begin to
Advertisement
Table of Contents
