European Union (Eu); Fcc - Siemens RUGGEDCOM RSG909R Installation Manual

RUGGEDCOM RSG909R
Installation Guide
The device also meets the requirements of the following European directive and standards:
• 2014/34/EU
Directive 2014/34/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation
of the laws of the Member States relating to equipment and protective systems intended for use in potentially
explosive atmospheres (recast) Text with EEA relevance
• EN 60079-0:2012/A11:2013
Explosive Atmospheres – Part 0: Equipment – General Requirements
• EN 60079-15:2010
Explosive Atmospheres – Part 15: Equipment Protection by Type of Protection "n"
Section 6.1.3

European Union (EU)

This device is declared by Siemens Canada Ltd to comply with essential requirements and other relevant provisions
of the following EU directives:
• EN 60950-1
Information Technology Equipment – Safety – Part 1: General Requirements
• EN 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity for Industrial Environments
• EN 60825-1
Safety of Laser Products – Equipment Classification and Requirements
• EN 50581
Technical Documentation for the Assessment of Electrical and Electronic Products with Respect to the Restriction
of Hazardous Substances
• CISPR 32/EN 55032
Electromagnetic compatibility of multimedia equipment – Emission requirements
The device is marked with a CE marking and can be used throughout the European community.
A copy of the CE Declaration of Conformity is available from Siemens Canada Ltd. For contact information, refer to
"Contacting Siemens".
Section 6.1.4

FCC

This device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
European Union (EU)
II 3 G Ex nA nC IIC T4 Gc
Chapter 6
Certification
37