Siemens RUGGEDCOM RSG909R Installation Manual page 31

RUGGEDCOM RSG909R
Installation Guide
Port
A Connect to port B of the neighboring HSR/PRP
RedBox or to the HSR ring
B Connect to port A of the neighboring HSR/PRP
RedBox or to the HSR ring
7 (Coupler) Connect to LAN A or LAN B
1 to 6 Connect to one or more Singly Attached Nodes
(SANs)
Connecting HSR Rings
In this application, the device operates as an HSR/HSR RedBox in an HSR ring that is connected to another HSR/HSR
RedBox. When linked, the two HSR/HSR RedBoxes form a QuadBox or Quadruple Port device. Connect the device as
follows:
NOTE
Quadbox applications typically consist of two Quadboxes between each HSR ring.
Connecting the Device to the Network
Connect To...
1
2
B
B
Figure 21: HSR-to-PRP Coupling
1. HSR Ring 2. HSR/PRP RedBox (RUGGEDCOM
RSG909R;RSG908C;RSG910C) 3. HSR/PRP RedBox (RUGGEDCOM
RSG907R) 4. PRP Network
Installing the Device
B A B A
3
5 5
A
4
A B A
Chapter 2
21