Adding A Recording To A Previously Recorded File - Sony ICD-SX813 Operating Instructions Manual

You can check the recording level value
with the peak meter of the display
window. Adjust the level closer to
–12 dB, into a range that is appropriate
for your sound source.
If " " is displayed, press
control button to adjust the recording
level down so that "
displayed, to prevent sound distortion.
Press and hold
control button to change the 录音水平
value continuously. The sound level is
also displayed as a number right side of
the level meter.
6
Make other settings according to the
state of recording.
If necessary, utilize the "LIMITER"
setting in the menu (page 96).
40
GB
on the
.
" is not
OVER indicator
Adjust the maximum
level of the sound to
about –12 dB.
. or > on the
7
To start recording, press
PAUSE.
8
To stop recording, press
P Notes
• In the manual recording mode, you cannot
record with the VOR function (page 45).
• In the manual recording mode, you cannot
review the current recording, even if you
press N /ENT.
Adding a recording to a
previously recorded file
REC/
z
STOP.
x
x STOP
z REC/PAUSE
N /ENT
v , V