Sony ICD-SX813 Operating Instructions Manual page 54

To record using the
synchronized recording function
The IC recorder pauses when no sound is
detected for more than 2 seconds. The IC
recorder starts recording again as a new file
when sound is detected.
1
Select the
录音" in the menu, and then press
ENT.
2
Press or
v V
select "开," and then press
"同步录音" is set to "关" when you
purchase the IC recorder.
3
Press x STOP to exit the menu mode.
4
Connect other equipment to the IC
recorder when the IC recorder is in the
stop mode.
Connect the audio output connector
(stereo mini-plug) of other equipment to
the m (microphone) jack of the IC
54
GB
(Recording) tab t "同步
on the control button to
/ENT.
N
recorder using a commercially-available
audio connecting cable.
"选择输入模式" appears in the display
window.
If "选择输入模式" is not displayed, set
it in the menu (page 98).
5
Press
N /
select "音频输入," and then press
ENT.
"选择输入模式" is set to "麦克风"
when you purchase the IC recorder.
6
Press
"
enters the recording pause mode.
7
Start playback on the piece of equipment
connected to the IC recorder.
"
synchronized recording starts.
v or V on the control button to
REC/PAUSE to start recording.
z
" flashes and the IC recorder
" appears on the display and
/
N