Download
Share
Print this page
Dunster House ATLAS P5-3050PRG Installation Manual
  1. Manuals
  2. Brands
  3. Dunster House Manuals
  4. Garden Houses
  5. ATLAS P5-3050PRG
  6. Installation manual

Dunster House ATLAS P5-3050PRG Installation Manual

Pergola 3.2m x 5.2m
Hide thumbs

Advertisement

Quick Links

Download this manual
INSTALLATION MANUAL
Manufacturer:
Dunster House Ltd.
Caxton Road
Bedford
Bedfordshire
England
MK41 0LF
ATLAS PERGOLA
3.2m x 5.2m
P5-3050PRG
Unique Product Reference Number:
__________________________________
V2
Customer Service Department:
cs@dunsterhouse.co.uk
www.dunsterhouse.co.uk

Advertisement

loading
Need help?

Need help?

Do you have a question about the ATLAS P5-3050PRG and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Dunster House ATLAS P5-3050PRG

Summary of Contents for Dunster House ATLAS P5-3050PRG

  • Page 1 INSTALLATION MANUAL ATLAS PERGOLA 3.2m x 5.2m P5-3050PRG Unique Product Reference Number: Manufacturer: Dunster House Ltd. Caxton Road __________________________________ Bedford Customer Service Department: Bedfordshire cs@dunsterhouse.co.uk England www.dunsterhouse.co.uk MK41 0LF...

  • Page 2: You Will Need

    In the unlikely event that you need to contact us, please do so in writing to: Email: cs@dunsterhouse.co.uk Post: Dunster House Ltd, Caxton Road, Elms Farm Industrial Estate, Bedford, MK41 0LF, England. Our Customer Service department is open 9 a.m. to 5 p.m. Monday to Friday. Please include your Sales Order (SO) number or post code in any correspondence with Customer Service to enable them to locate your file.
  • Page 3 Components required for Atlas Pergola 5.2m x 3.2m 120x120x2260.A 6x Post (Pressure Treated) 2260 45x140x3200.A 7x Rafter (Pressure Treated) 3200 45x70x3200.A 2x (Pressure Treated) 3200 45x140x2645.A 2x Rafter (Pressure Treated) 2645 45x140x630.A 20x120x300.A 12x Rafter (Pressure Treated) 24x Post Trim (Pressure Treated) 45x140x2600.A x2 Rafter (Pressure Treated) 2500...
  • Page 4 Assembly Steps for Atlas Pergola 5.2m x 3.2m **Avoid splitting timber parts by pre-drilling all screw holes** x4 45x140x2600.B 120x120x2260.A x2 45x140x2645.B 45x145x3200.A 100mm Screws • Prepare 2 assemblies of the Beams and Posts as shown in the diagram below. Step 1.
  • Page 5 Assembly Steps for Atlas Pergola 5.2m x 3.2m **Avoid splitting timber parts by pre-drilling all screw holes** 45x140x630.A 24x M10 Washer 70x70x55mm Bracket 35mm Screws M10x120mm Hex Head Screws • Make sure your posts are level vertically (use a spirit level). Step 3.
  • Page 6 Assembly Steps for Atlas Pergola 5.2m x 3.2m **Avoid splitting timber parts by pre-drilling all screw holes** 45x140x3200.A 100mm Screws 45x70x3200.A 35mm Screws 20x120x300.A Step 4. • Connect (x5) 45x140x3200.B Rafters and (x2) 45x70x3200.A Top Beams by placing them onto the assembled frame as shown in the diagram below.
  • Page 7 INSTALLATION MANUAL Additional Wall Panels Atlas Pegola IMPORTANT INFORMATION Please remove component 45x140x630.A (Brace) if components CP1 and or CP8 are being installed. Please note: 1. These instructions will enable you to assemble additional wall panels to your Pergola. The configuration of the panels shown on the illustrations may very from the product you have purchased. 2.
  • Page 8 Components required for Additional Wall Panels Panel CP1 Panel CP2 Panel CP8 Page 8...
  • Page 9 Components required for Additional Wall Panels Panel CP1 Panel CP9 Page 9...
  • Page 10 Components required for Additional Wall Panels 15x70x2120 Full Wall Panel Trim 2120 15x70x1065 Half Wall Panel Trim 1065 15x70x1035 1035 Glass Wall Panel Trim 20x100x908 Glass Wall Panel Sill 15x70x2120 Half Panel Trim CP10 2120 20x100x455 Post 15x75x1085 Half Wall Panel Trim 1085 ACCESSORIES Description...
  • Page 11 Assembly Steps for Atlas Pergola 5.2m x 3.2m Full height wall panels assembly ** Quantity of components will vary, Panel CP1 & CP10 M10 Shield Anchors depending on your purchase. 60mm Screws M10x28 Washers M10x110 Bolts Step 1. • Position the Panel CP1 and CP10 between the Posts as shown in the diagram below. •...
  • Page 12 Assembly Steps for Atlas Pergola 5.2m x 3.2m Full height wall panels assembly 15x70x2120 Trim 35mm Screws Step 2. • Fix 15x70x2120 Trims using (8) 35mm screws per trim on the outside of the wall panels. • Fix 15x70x2120 Trims using (8) 35mm screws per trim on the inside of the wall panels. •...
  • Page 13 Assembly Steps for Atlas Pergola 5.2m x 3.2m Half height wall panels assembly ** Quantity of components will vary, Panel CP2 & CP9 M10 Shield Anchors depending on your purchase. 60mm Screws M10x28 Washers M10x110 Bolts Step 1. • Position the Panels between the Posts as shown in the diagram below. •...
  • Page 14 Assembly Steps for Atlas Pergola 5.2m x 3.2m Half height wall panels assembly 20x100x908 & 20x10x455 15x70x1065 & 15x70x1085 35mm Screws Step 2. • Position 20x100x908 Sills on top of Panels CP2 so that they are flush with the panel frame from inside the gazebo.
  • Page 15 Assembly Steps for Atlas Pergola 5.2m x 3.2m Window panels assembly Panel CP8 & CP10 60mm Screws **Assemble half height wall panels according to 35mm Screws the instructions given on the previous pages. 15x70x1035 • Remove the beading trims from one side of Panel CP8 frames. Step 1.
  • Page 16 Assembly Steps for Atlas Pergola 5.2m x 3.2m 40mm Pin Nail 4x825x960 TGLASS 19x25x840 19x25x915 Step 1: Place silicone around the edge of the frame. Silicone Please note: The glass is a smaller size compared to panel frame to compensate for timbers Silicone Silicone contracting, swelling and glass not being...