Setup; Videos - laguna Revo 18 Owner's Manual

Revo 18|36 Lathe \ Setup

Setup

Setup Overview (MUST READ)
When setting up your Revo 18|36 Lathe, please take a moment to read this overview prior to starting.
The machine comes mostly assembled. You will have to assemble the legs, headstock, tailstock, tool
storage and the tool rest to the bed of the machine. NOTICE! It is recommended that the head stock, tool
rest and tailstock be removed from the bed of the lathe to ease assembly (Covered later in the manual).
After Setup, There may be a few adjustment to be made. All of these adjustments are done prior to shipping
the machine, but if found to need adjustments please follow the adjustment guides.
If you have any doubt about the described procedure, seek professional assistance. Do not
attempt any procedure that you feel is unsafe, or that you do not have the physical capability of achieving.

Videos

REVO 1836 Lathe Setup - Unboxing The Lathe -
Part 1
REVO 1836 Lathe Setup - Mount Legs To Bed - Part
3
REVO 1836 Lathe Setup - 3 Inch Riser Blocks
Install - Part 2
REVO 1836 Lathe Setup - Mount Head And
Tailstocks - Part 4
21