NEC NP-PA550W User Manual page 46

5500-lumen widescreen advanced professional installation projector
Hide thumbs Also See for NP-PA550W:
Table of Contents

Advertisement

The adjustable ranges for 3D Reform are as follows:
PA600X/PA500X/PA550W
CORNERSTONE
KEYSTONE
PA500U
CORNERSTONE
KEYSTONE
* The following are conditions under which the maximum angle is achieved:
When the lens NP13ZL is used
When the lens shift is set to the center
When the lens shift is used and yet the image is not displayed in the center of the screen, the adjustable range
will be increased or decreased.
Image is projected in maximum wide with the zoom ring
NOTE:
• Even when the projector is turned on, the last used correction values are applied.
• If the Cornerstone screen is unavailable (grayed), press and hold the 3D REFORM button for a minimum of 2 seconds to reset
the current correction data. The Cornerstone function becomes available.
• Turning on the projector will reset the previous correction setting values and correct distortion anew if the projection angle is
changed from the last use.
If the projection angle is the same as in the last use, the previous correction setting values are retained in the memory.
• The range of keystone correction is not the maximum tilt angle of projector.
NOTE: Using 3D Reform correction can cause the image to be slightly blurred because the correction is made electronically.
HORIZONTAL
Max. +/− 40° approx.
HORIZONTAL
Max. +/− 35° approx.
34
3. Convenient Features
VERTICAL
Max. +/− 30° approx.
VERTICAL
Max. +/− 30° approx.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents