NEC NP-PA550W User Manual page 100

Using the Entry List
When any source adjustments are made, the adjustments are automatically registered in the Entry List.The (adjustment
values of) registered signals can be loaded from the Entry List whenever necessary.
However, only up to 100 patterns can be registered in the Entry List. When 100 patterns have been registered in the
Entry List, an error message is then displayed and no additional patterns can be registered. You should thus delete
(adjustment values of) signals that are no longer needed.
Displaying the Entry list
1. Press the MENU button.
The menu will be displayed.
2. Press the  or  button to select [SOURCE].
The SOURCE list will be displayed.
3. Use the , , , or  to select [ENTRY LIST] and press the ENTER button.
The ENTRY LIST windows will be displayed.
If the ENTRY LIST window is not displayed, switch the menu to [ADVANCED].
To switch the menu between [ADVANCED] and [BASIC], select [APPLICATION MENU] → [TOOLS] →
[ADMINISTRATOR MODE]. (→ page 136)
88
5. Using On-Screen Menu