Digital Rgb Signal Connection - NEC NP-PA550W User Manual

Digital RGB signal connection

• Connect a commercially available HDMI cable between the computer's HDMI output connector and the projector's
HDMI input connector.
• Connect a commercially available DisplayPort cable between the computer's DisplayPort output connector and
the projector's DisplayPort input connector.
HDMI cable (not supplied)
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
HDMI IN
DisplayPort
NOTE:
• Turn off the power of the computer and projector before connecting.
• Lower the computer's volume setting before connecting an audio cable to the headphones connector. When using with a computer
connected to the projector, adjust the volume of both the projector and computer to set the appropriate volume level.
• If the computer has a mini-jack type audio output connector, we recommend connecting the audio cable to that connector.
• This projector does not support NEC video unit (model ISS-6020) video decoded outputs.
• When a video deck is connected via a scan converter, etc., the display may not be correct during fast-forwarding and
rewinding.
TIP
• The Computer 1 and Computer 2 video input connectors support Windows Plug and Play. The Computer 3 video input connector
does not support Windows Plug and Play.
• A Macintosh signal adapter (commercially available) may be required to connect a Macintosh computer.
To connect a Macintosh computer equipped with a Mini DisplayPort to the projector, use a commercially available Mini DisplayPort
→ DisplayPort converter cable.
SOURCE button on the projector
cabinet
HDMI
DisplayPort
6. Installation and Connections
DisplayPort cable (not supplied)
Button on the remote control
144
HDMI
DisplayPort