441-4I4O-DC WARRANTY STATEMENT BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly used and installed, will be free from defects in material and workmanship for a period of 1 year after date of purchase. Said warranty to include the repair or replacement of defective equipment. This warranty does not cover damage due to external causes, including accident, problems with electrical power, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or improper testing.
441-4I4O-DC INTRODUCTION The Air-Eagle XLT is an RF system designed for long range wireless remote control of electrical apparatus in a variety of industrial applications. Systems can consist of any number of receivers and handheld or contact input transmitters working together to create a long-range radio frequency system that operates hazardous or hard-to-reach equipment from safe, convenient locations.
441-4I4O-DC GENERAL OPERATION Contact closures on inputs 1 - 4 in the control transceiver transmit to activate relays 1 - 4 in the remote transceiver. Inputs from the remote equipment provide closures to remote transceiver that transmit to energize relays 1 - 4 in the control transceiver. Input Activated Action Transmits Channel 1 command to remote unit.
Page 5
441-4I4O-DC RELAY, CHANNEL CODE, REPEATER, & FREQUENCY SETUP The unit is shipped from the factory RELAY CONFIGURATION with SEL1 switches in the open SEL1 positions. All relays will operate as OPEN (default) CLOSED maintained momentary, unit is transmitting and receiving channel Relays #1 and #2 Relays #1 and #2 codes 1-4, repeater mode is off, and...
STANDARD ANTENNA (INCLUDED) 900MHz TNC Portable “Rubber Duck” Antenna 49-1103 MOBILE/BASE ANTENNAS (OPTIONAL) Used to help achieve max range in non-line-of-sight and line-of-sight applications. Contact BWI Eagle for recommendations. 900MHz Thru-Hole/Bracket Mount Mobile Antenna 49-2101 900MHz Magnet Mount Mobile Antenna 49-2102...
441-4I4O-DC CONTROLS & INDICATORS Dual color LED illuminates red while unit is booting up, changes to green POWER/TX when boot-up is successful and unit is ready to operate. LED1 If this LED fails to turn green, power unit off for 15-20 seconds, then reapply power.