Related Manuals for BWI Eagle AIR-EAGLE XLT PLUS 461-40800-DC
Summary of Contents for BWI Eagle AIR-EAGLE XLT PLUS 461-40800-DC
- Page 1 AIR-EAGLE XLT PLUS 461-40800-DC 900 MHz RF Transceiver Document Date: 8/5/2022 Product Rev: 4...
-
Page 2: Warranty Statement
461-40800-DC WARRANTY STATEMENT BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly used and installed, will be free from defects in material and workmanship for a period of 1 year after date of purchase. Said warranty to include the repair or replacement of defective equipment. This warranty does not cover damage due to external causes, including accident, problems with electrical power, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or improper testing. -
Page 3: Installation
461-40800-DC INTRODUCTION The A XLT P RF T provides two-way wireless control of electronic equipment and AGLE RANSCEIVER apparatus at distances up to 1 mile away (longer ranges can be achieved with external antennas). This model comes equipped with eight dry contact inputs and eight relay outputs. This allows the user to not only transmit information out but receive a confirming signal back that the operation was performed A terminal strip has been provided for interfacing with external dry contact inputs as well as dry contact relay outputs. -
Page 4: General Operation
461-40800-DC GENERAL OPERATION Contact closures on inputs 1 thru 8 in the control transceiver transmit to activate relays #1 thru #8 in the remote transceiver. Inputs from the remote equipment provide closures to remote transceiver that transmit to energize relays 1 thru 8 in the control transceiver. Input Activated Action Transmits Channel 1 command to remote unit. -
Page 5: Terminal Strip Wiring
461-40800-DC TERMINAL STRIP WIRING Relay Outputs Terminal 1 N/O Relay #1 Terminal 10 N/O Relay #4 Terminal 19 N/O Relay #7 Terminal 2 C Relay #1 Terminal 11 C Relay #4 Terminal 20 C Relay #7 Terminal 3 N/C Relay #1 Terminal 12 N/C Relay #4 Terminal 21... - Page 6 461-40800-DC RELAY & FREQUENCY SETUP The unit is shipped from the factory RELAY CONFIGURATION with SEL1 switches in the open SEL1 positions. All eight relays will operate OPEN (default) CLOSED as maintained momentary and unit is receiving commands on frequency Relays #1 - #8 Relays #1 - #8 one.
-
Page 7: Specifications
STANDARD ANTENNA (INCLUDED) 900MHz TNC Portable “Rubber Duck” Antenna 49-1103 MOBILE/BASE ANTENNAS (OPTIONAL) Used to help achieve max range in non-line-of-sight and line-of-sight applications. Contact BWI Eagle for recommendations. 900MHz Thru-Hole/Bracket Mount Mobile Antenna 49-2101 900MHz Magnet Mount Mobile Antenna 49-2102... - Page 8 461-40800-DC DIMENSIONS...