Table of Contents
Advertisement
Tag7
LANGUAGE*
OSD H.POSITION
OSD V.POSITION
OSD TURN OFF
OSD LOCK OUT*
OSD TRANSPARENCY Adjusts the transparency of the OSD MENU.
OSD COLOR*
BOOT LOGO*
SIGNAL
INFORMATION*
RESOLUTION
2
NOTIFIER*
2
HOT KEY*
FACTORY PRESET*
Tag8
PIP MODE
PIP INPUT
PIP LEFT/RIGHT
PIP DOWN/UP
PIP SIZE
BLANK SIGNAL SKIP Skip no signal inputs when you change input signal with INPUT button.
*2 This item does not reset by FACTORY PRESET (Tag7).
2
OSD control menus are available in nine languages. Press "LEFT" or "RIGHT" to select.
You can choose where you would like the OSD control image to appear on your screen.
Selecting OSD Location allows you to manually adjust the position of the OSD control
menu left or right.
You can choose where you would like the OSD control image to appear on your screen.
Selecting OSD Location allows you to manually adjust the position of the OSD control
menu up or down.
The OSD control menu will stay on as long as it is use. You can select how long the
monitor waits after the last touch of a button to shut off the OSD control menu.
The preset choices are 10-120 seconds in 5 second increments.
2
This control completely locks out access to all OSD control functions. When attempting
to activate OSD controls while in the Lock Out mode, a screen will appear indicating the
OSD controls are locked out.
There are three types of OSD LOCK OUT:
OSD LOCK OUT with no control: To activate the OSD Lock Out function, press SELECT,
then "RIGHT" button and hold down simultaneously. To deactivate the OSD Lock Out,
press SELECT, then "RIGHT" button and hold down simultaneously while in the OSD
menu. No controls can be adjusted while in the lock out mode.
OSD LOCK OUT with BRIGHTNESS (only) control: To activate the OSD Lock
Out function, press SELECT, then "DOWN" and "LEFT" buttons and hold down
simultaneously. To deactivate the OSD Lock Out, press SELECT, then "DOWN" and
"LEFT" buttons and hold down simultaneously while in the OSD menu. BRIGHTNESS
can be adjusted while in the lock out mode.
CUSTOM: Press RESET and EXIT to enter the CUSTOM Menu. Select ENABLE or
DISABLE for POWER KEY, INPUT SEL, HOT KEY (BRIGHTNESS), PICTURE MODE,
WARNING (RESOLUTION NOTIFIER/OSD LOCK OUT). To Deactivate the OSD Lock
Out function, press RESET and EXIT to bring up the LOCK OUT warning.
Press SELECT, SELECT, <, >, <, >, EXIT.
2
"Tag window frame color", "Item select color" & "Adjust Window frame color" can be
changed.
2
The NEC logo is briefl y displayed after the monitor is powered on. This feature can be
turned on or off in the OSD.
Note: If the "EXIT" button is kept pressed while NEC logo is displayed, the BOOT LOGO
menu will appear. It is possible to change the BOOT LOGO setting to OFF.
Signal information can be displayed in the corner of the screen.
2
Signal information is either "ON/OFF".
The optimal resolution is 2560 x 1600. If ON is selected, a message will appear on the
screen after 30 seconds, notifying you that the resolution is not set to 2560 x 1600.
Press "LEFT" or "RIGHT" to select.
When this function is activated; the brightness of the monitor can be adjusted without
entering the OSD menu by using the front buttons.
The "LEFT" or "RIGHT" buttons adjust the brightness level.
When this function is set to OFF, some buttons are disabled. See page 9.
2
Selecting Factory Preset allows you to reset all OSD control settings back to the factory
settings. Highlighting the control to be reset and pressing the RESET button can reset
individual settings.
Selects PIP MODE, OFF/PIP/PICTURE BY PICTURE - ASPECT/PICTURE BY
PICTURE - FULL. See page 11.
Selects the PIP input signal.
When you select "PIP" in PIP MODE, you can control horizontal position of PIP display
area.
When you select "PIP" in PIP MODE, you can control vertical position of PIP display area.
Selects the size of the sub-picture used in PIP mode.
English-20
Advertisement
Table of Contents
