NEC MD301C4 Installation & Maintenance Manual page 20

UNIFORMITY
Tag2 SHARPNESS
RESPONSE
IMPROVE
ECO MODE
AUTO BRIGHTNESS
METAMERISM
AMBIENT LIGHT
COMP.
6 - AXIS ADJUST
SHORTCUT
CUSTOM
Tag3 DVI Long Cable
(DVI input only)
Tag4 Not adjustable
Tag5 H.POSITION
V.POSITION
H.RESOLUTION
V.RESOLUTION
This function electronically compensates for the slight variations in the white uniformity
level as well as for deviations in color that may occur throughout the display area of
the screen. These variations are characteristic of LCD panel technology. This function
improves the color and evens out the luminance uniformity of the display.
NOTE: Using the UNIFORMITY feature does reduce the overall peak luminance of the
display. If greater luminance is desired over the uniform performance of the display,
then UNIFORMITY should be turned off. A higher number produces a better effect, but
may also reduce CONTRAST RATIO. When BRIGHTNESS is shown in magenta, the
UNIFORMITY setting is automatically changed.
This is a digital capability for keeping a crisp image at all signal timings. It continuously
adjusts to maintain as distinct or as soft image as you prefer, and is set independently
according to different timings. Press "LEFT" or "RIGHT" to adjust.
Turns the Response Improve function on or off. Response Improve may reduce blurring
that occurs in some moving images.
Decreases the amount of power consumed by reducing the brightness level.
OFF: No function.
MODE1: Decreases the brightness range up to about 200 cd/m
MODE2: Decreases the brightness range up to about 100 cd/m
Auto Brightness has three settings.
"OFF" is recommended for best color reproduction.
OFF: No function.
ON: Adjusts the brightness automatically, by detecting the brightness level of your
environment and adjusting the monitor with the best BRIGHTNESS setting*
*1: Please refer to Page 29 for full "Auto Brightness" information.
Note: Do not cover environmental brightness sensor (AUTO DIMMING sensor).
Improves the white point color matching when the display used side-by-side with a
standard gamut display monitor. This feature compensates for the way the human eye
perceives colors slightly differently compared to the scientifi c instrument used to adjust
the display during calibration.
Luminance setting depends on ambient light compensation.
Mostly affects black reproduction.
NOTE: AUTO DIMMING SENSOR measures ambient brightness when power is on and
affects image and color quality settings.
NOTE: Do not cover environmental brightness sensor (AUTO DIMMING sensor).
HUE: Adjusts the hue of each color*
menu color bars will show the amount of adjustment.
SATURATION: Adjusts the color depth of each color*
color vividness increases.
OFFSET: Adjusts the color brightness of each color*
color Brightness increases.
*1: RED, YELLOW, GREEN, CYAN, BLUE and MAGENTA.
You can select the PICTURE MODE which are displayed in PICTURE MODE shortcut
menu.
Compensates for image degradation caused by using a long DVI cable.
There are 4 possible settings, with "0" being the lowest level of compensation and "3"
being the highest level. The default setting is "1".
Controls Horizontal Image Position within the display area of the LCD.
Press "LEFT" or "RIGHT" to adjust.
Controls Vertical Image Position within the display area of the LCD.
Press "LEFT" or "RIGHT" to adjust.
Adjusts the horizontal size by increasing or decreasing the setting.
Press "RIGHT" button to expand the width of the image on the screen.
Press "LEFT" button to narrow the width of the image on the screen.
Adjusts the vertical size by increasing or decreasing the setting.
Press "RIGHT" button to expand the height of the image on the screen.
Press "LEFT" button to narrow the height of the image on the screen.
English-18
1 . The change in color will appear on screen and the
1 . Press the "RIGHT" button and the
1 . Press "RIGHT" button and the
2 .
2
.
1 .