NEC MD211G3 Quick Reference Manual page 13

21" grayscale 3-megapixel medical diagnostic monitor

Hide thumbs Also See for MD211G3:

Table of Contents

7. Slide down the cable cover (Figure D.1).

8. Connect one end of the power cord to the AC inlet on the back of the monitor and the other end to the power outlet.

NOTE:

Please refer to the Caution section of this manual for proper selection of an AC power cord.

9. Turn on the monitor with power switch on the top (Portrait) or left side (Landscape) of the monitor (Figure E.1). Turn on the

computer.

NOTE:

If you have any problems, please refer to the Troubleshooting section of this User's Manual (CD-ROM Version).

MD211G3 paper manual.indb 9

Figure D.1

Power switch

Figure E.1

English-9

3/27/12 11:18:32 AM

Table of Contents

Mdg3-bndl1 Mdg3-bndn1