Controls - Sharp SMO1752JS Operation Manual

C O N T R O L S
SETTING THE CLOCK
When the oven is first plugged in, the display will flash "12:00" and a tone will sound. If the AC power ever goes
off, the display show "12:00" when the power comes back on.
1. Press the CLOCK pad.
CLOCK
3 SEC
2.
3.
NOTE:
1. If you attempt to enter an incorrect time, the time will not be set and a error signal tone will sound. Press the
CLOCK pad and re-enter the time.
2. If you want to turn sound on off, press and hold CLOCK pad for 3 seconds. For detailed information on
this feature, see Controls section, page 27.
SETTING THE TIMER
Timer operates as a minute timer.
Timer operates without microwave energy.
HOW TO USE AS A MINUTE TIMER
1. Press TIMER/FILTER pad.
TIMER
FILTER
2. Press the amount of time you want
3. Press TIMER/FILTER pad.
When you press the TIMER/FILTER pad, the TIME indicator starts blinking and the display counts down the time
remaing in TIMER mode.
When TIMER mode ends, you will hear 2 beeps
while the display is counting down.
This is a 12 hour clock system.
Enter the correct time of day by
pressing the number pads in
sequence.
Press the CLOCK pad.
to count down.
The Current CLOCK is displayed.
This digital clock allows you to set from 1:00 to
12:59.
The TIMER indicators display and " : 0" is
displayed.
The display will show what you pressed.
. To end the timer early, press the TIMER/FILTER pad once
14