Sharp SMO1752JS Operation Manual page 31

C A R E A N D C L E A N I N G
LIGHT REPLACEMENT
Cooktop Light
When replacing the cooktop light, make sure that you are wearing gloves to avoid injury from the heat of the
lamp.
Oven Light
When replacing the cooktop light, make sure that you are wearing gloves to avoid injury from the heat of the
light.
Vent grille mounting screws
Vent grille
1. Disconnect the main power supply；
2. Remove the 7 screws from the Baseplate;
3. Remove the screw from the lamp-holder;
4. Unplug the wire harness of the lamp and replace it；
5. Insert the wire harness again and relock the lamp-
holder screw;
6. Relock the 7 screws on the Baseplate;
7. Reconnect the main power supply.
1. Disconnect power to your microwave at the circuit
breaker or by unplugging it.
2. Remove the vent grille mounting screws from the
top center of the vent grille, then push down on
the tabs at
3. Pull the vent grille away from the unit.
31