Sharp SMO1752JS Operation Manual page 32

C A R E A N D C L E A N I N G
Charcoal lter
Light cover
Light cover screw
Vent grille
4. Remove the charcoal lter.
5. Open the light cover by removing the light cover
screw, then carefully pull up on the front edge.
6. Remove the old light bulb, then replace with a
new bulb.
7. Replace the microwave light cover by carefully
pushing it into place, then replace the mounting
screws.
8. Push the vent grille back into place and replace
the vent grille mounting screws.
32