Cisco TelePresence MX Series Administrator's Manual page 99

Cisco TelePresence MX Series
Contents
Setting the menu password
When starting up the video conference system for the first
time anyone can access the Administrator Settings menu with
the Touch controller because the menu password is not set.
We strongly recommend that you set a menu
password, because the administrator settings may
severely affect the behavior of the system.
You should use the web interface to set the menu password;
the Touch controller cannot be used.
D14850.05 MX Series Administrator Guide TC6.1, APRIL 2013.
Introduction Web interface
Setting the menu password from the web
interface
1. Sign in to the web interface with your user name and
current password.
2. Go to Configuration > System
3. Click Set/Change Administrator Settings menu password
to open the menu password dialog.
4. Enter the password in the input field.
5. Click Save
To find the system's IP address tap
System Information
System settings
Configuration.
to set/change the password.
Settings (
on the Touch controller.
99
Setting passwords Setting passwords
) >
www.cisco.com — Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices