Cisco TelePresence MX Series Administrator's Manual page 10

Cisco TelePresence MX Series
Contents
Starting the web interface
The web interface provides full configuration access to your
video conference system.
You can connect from a computer and administer the system
remotely.
In this chapter you will find information how to use the web
interface for system configuration and maintenance.
We recommend that you use the latest release of one of the
major web browser.
D14850.05 MX Series Administrator Guide TC6.1, APRIL 2013.
Introduction Web interface Web interface
1. Connect to the video system
Open a web browser and enter the IP address of
the video system in the address bar.
To find the IP address (IPv4 or IPv6), tap
Settings (
System settings
) on the Touch controller.
2. Sign in
Enter the user name and password for your video
system and click
10
Setting passwords
Sign In.
The system is delivered with a default user
named admin with no password (i.e. leave the
Password field blank when signing in for the first
time).
We strongly recommend that you set a
password for the admin user, see the next page.
www.cisco.com — Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices
Signing out
Hover the mouse
over your user
name and choose
Sign out from the
drop-down list.