Download Print this page

Cisco TelePresence MX Series Administrator's Manual page 17

Hide thumbs Also See for TelePresence MX Series:

Advertisement

Cisco TelePresence MX Series
Contents
Controlling the camera
You can control the camera using the Call Control page.
Click the
Camera Control
button to open the window where
you can pan, tilt and zoom the camera, and apply camera
presets.
D14850.05 MX Series Administrator Guide TC6.1, APRIL 2013.
Introduction
Web interface
Web interface
Navigate to: Call Control > Call Control
Pan and tilt
Use the left and right
arrows to pan the camera,
and the up and down
arrows to tilt it.
Zoom
Use
+
and
-
in and out.
System settings
to zoom
17
Setting passwords
Camera presets
If a camera preset is
defined it is listed here.
Apply the preset by clicking
its name.
Choose which camera to control
Click the arrow to open the
drop-down list. Then choose the
camera you want to control.
www.cisco.com — Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices

Advertisement

loading

This manual is also suitable for:

Telepresence mx200Telepresence mx300