Table of Contents
Advertisement
A+ SERVER 2022G-URF User's Manual
Figure 6-4. Removing a SAS/SATA Drive Carrier
Handle
Release Button
Important: All of the drive carriers must remain in the drive bays
!
to maintain proper cooling airfl ow.
Hard Drive Backplane
The hard drives plug into a backplane that provides power, drive ID and bus
termination. A RAID controller can be used with the backplane to provide data
security. The operating system you use must have RAID support to enable the
hot-swap capability of the hard drives. The backplane is already preconfi gured, so
no jumper or switch confi gurations are required.
6-6
Advertisement
Table of Contents
