Troubleshooting Tips - GE Profile PTW9000 Owner's Manual & Installation Instructions

Troubleshooting tips ...

Save time and money! Review the charts on the following pages first and you may not need to call for service.
Problem
Warming drawer will
not work
Drawer does not slide
smoothly or drags
Excessive
condensation
No heat in the PROOF
setting
Food dries out
16
Possible Cause
A fuse in your home may be blown or the circuit
breaker tripped.
Warming drawer not plugged in.
Controls improperly set.
Temperature setting too high.
Incorrect Moisture Selector setting.
Room temperature may prevent the thermostat
from tripping on.
Moisture escaping.
What To Do
Replace the fuse or reset the circuit breaker.
Plug in.
Fully extend the drawer and push it all the way in.
See the Care and cleaning section.
Reduce weight to less than 50 pounds.
Redistribute drawer contents.
Remove liquid.
Cover food with lid or aluminum foil.
Reduce temperature setting.
Set the Moisture Selector to the open vent setting
to allow venting.
Cover food with lid or aluminum foil.
49-2000768 Rev. 0