GE Profile PTW9000 Owner's Manual & Installation Instructions page 14

INSTALLING CABINET SUPPORT
23 1
IMPORTANT: When installed below a single or double
oven, check to be sure that any oven supports above
the cutout do not obstruct the 23
the warming drawer cutout.
A 2" minimum clearance between oven and
warming drawer cutouts are required. Additional
clearance may be required if 2 x 4 blocks are used
to support runners or solid floor of the oven above.
solid bottom, 2 x 4 or 2 x 2 runners.
14
Installation Instructions
2" x 4" or equivalent runners
/ "
2
22"
27"
/ " required depth of
1
2
2" x 4" or equivalent runners
23 1 / "
2
25"
30"
flush with the bottom edge of the cutout.
There is no way to level the drawer once it has
been installed. Be sure supports are level.
the runners or solid floor and must be capable of
supporting 150 lbs.
49-2000768 Rev. 0