Table of Contents
Advertisement
Chapter 2 - Hardware Installations
X Removing the Chassis Cover
Please observe the following guidelines and follow the instructions to open the system.
1. Make sure the system and all other peripheral devices connected to it have been
powered off.
2. Disconnect all power cords and cables.
Step 1:
The 5 screws on the bottom of the system are used to secure the cover to the chassis. Remove
the screws and put them in a safe place for later use.
Bottom View
User's Manual | ED700-EHL
Step 2:
Lift the cover to open the system.
Step 3:
The board can be easily accessed after the chassis cover is removed.
Chapter 2
HARDWARE INSTALLATION
10
Advertisement
Table of Contents
