Advertisement
Setting TIMER ON & OFF (example).
xn
TIMER
Unit turns
Timer starts
ON
Current
2:00PM
3:00PM
3:30PM
time 1PM
2.5 hours later
5 hours later
07
xn
xn
TIMER
Unit turns
OFF
Example: If current timer is 1:00PM,
to set the timer as above steps, the
unit will turn on 2.5h later (3:30PM)
and turn off at 6:00PM.
4PM
5PM
6PM
4. HOW TO USE ADVANCED FUNCTIONS
Press Swing button when the unit is turned on.
The horizontal louver will
Swing
swing up and down automatically
when pressing Swing button.
Swing
Press again to make it stop.
If continue to press the SWING button, five different airflow directions can be set(Model dependent). The louver can
be move at a certain range each time you press the button. Press the button until the direction you prefer is reached.
NOTE:
When the unit is off, press and hold MODE and SWING buttons together for one second, the louver will open
for a certain angle, which makes it very convenient for cleaning. Press and hold MODE and SWING buttons together
for one second to reset the louver(some units only).
Press this button under COOL Mode to enter the energy efficient mode.
Press this button to enter the energy efficient mode in a sequence of
following:
ECO
GEAR(75%)
Note:This function is only available under COOL mode.
ECO operation:
Eco
Under cooling mode, press this button, the remote controller will adjust the temperature automatically to
24 C/75 F, fan speed of Auto to save energy (only when the set temperature is less than 24 C/75 F). If the
O
O
Gear
set temperature is above 24 C/75 F, press this button, the fan speed will change to Auto, the set temperature
O
O
will remain unchanged.
Note:
Pressing the this button, or modifying the mode or adjusting the set temperature to less than 24 C/75 F will
stop ECO operation.
Under ECO operation, the set tmeperature should be 24 C/75 F or above, it may result in
insufficient cooling. If you feel uncomfortable, just press this button again to stop it.
GEAR operation:
Press the Eco/Gear button to enter the GEAR operation as following:
75%(up to 75% electrial energy consumption)
Previous setting mode.
Under GEAR operation, the display on the remote controller will alternage between electical
energy consumption and set temperature.
2s
Keep pressing this button more
Swing
than 2 seconds, the vertical louver
swing function is activated.
(Model dependent)
GEAR(50%)
Previous setting mode
ECO......
O
O
O
O
O
50%(up to 50% electrial energy consumption)
O
08
Advertisement
