Advertisement
4. HOW TO USE ADVANCED FUNCTIONS
Press Swing button
Swing
Swing
The horizontal louver will swing up and down
automatically when pressing Swing button.
Press again to make it stop.
Press Fix button
Fix
Fix
The horizontal louver will move an angle of 6 degree for each press.
Press the button until the louver reach your prefer location.
Press ECO Sleep button under Auto/Cool/Heat mode
The set temp. will increase(cooling)
or decrease (heating) by 1 C per
ECO
hour for the first 2hs. Please refer
Sleep
to the OWNER'S MANUAL for
ECO
more details.
Sleep
This Sleep operation saves energy and improves night time comfort by synchronising with the
body's metabolism. The sleep function is not available in Fan or Dry mode.
Press this button more than 2 seconds
2s
The unit will memorize
My
the current setting
My
Mode
mode, Temp., fan).
Mode
My Mode function enable you to memorize or restore your favorite settings (mode, temperature and fan
speed). The default memorized setting is AUTO mode, 26 C and AUTO fan.
07
2s
Swing
Keep pressing this button more than 2 seconds,
the vertical louver swing function is activated.
(Model dependent)
Press this button
The unit will restore to
My
the setting you made
Mode
last time.
Press this button under COOL or HEAT operating Mode
The controller will display
Follow
the actual temp. at its
Follow
location and send this
Me
Me
signal to indoor unit
or
every 3 minutes
Smart
eye
Press this button to activate Follow me. This function
can adjust room temperature base on the controller's
sensor and make you comfort.
Note:Please put the controller in the location where
can ensure the indoor unit can receive the signal.
Press LED button
LED
LED
or
Fresh
Press this button to turn on and turn off the display
on the indoor unit.
Press this button
High Power
The unit will operate at
the biggest capacity
(Turbo)
High
output to reach the
Power
or
setting Temp. quickly.
Self Clean
Press this button to activate High Power(Turbo)
feature. It enables the unit to reach the set
temperature in the shortest time. Press it
again to disable it.(Model dependent)
Press this button more than 2 seconds
2s
The smart eye feature
Follow
is energized.
Me
Keep pressing this button more than 2 seconds, the
smart eye function is activated and will detects the
people activities in the room. (Model dependent)
Press this button more than 2 seconds
2s
The ionizer or Plasma
dust collector (model
LED
dependent) is energized.
Keep pressing this button more than 2 seconds, the
fresh function is activated and will help to remove
pollen and impurities from the air. (Model dependent)
Press this button under COOL or DRY Mode more
than 2 seconds
2s
The unit will enter low
fan mode to dry up the
High
coil. The cleaning cycle
Power
takes 15~30 mins, after
which the unit will turn
off automatically.
Keep pressing this button more than 2 seconds, the
unit will clean itself to avoid bacteria grow around
heat exchanger.(Model dependent)
08
Advertisement
