Storing The Machine In The Vertical-Stow Position - Toro Recycler 21566T Operator's Manual

Storing the Machine in the
Vertical-Stow Position
During the mowing season or in the off-season, you
can store your machine in the vertical position to
minimize storage space.
DANGER
The vertical-stow position exposes the bottom
of the machine.
• Remove the battery pack and the
electric-start button before moving the
machine into the vertical-stow position.
• Do not transport the machine in the
vertical-stow position.
• Do not attempt to start the machine in the
vertical-stow position.
1. Ensure that the cutting-height setting on the
machine is 92 mm (3-5/8 inches) or lower. If
it is not, lower it; refer to
Height (page 19).
2. Disengage the handle locks
Figure 25
1. Handle lock disengaged
positions
3. Fold the handle fully forward
Important:
Route the cables to the outside
of the handle knobs as you fold the handle.
4. Engage the handle locks.
5. Lift the front of the machine by the handle and
move it into a storage space
Adjusting the Cutting
(Figure 25).
g370560
2. Handle lock engaged
position
(Figure 25).
(Figure 26).
27
Figure 26
g367781