Adjusting The Handle Height - Toro Recycler 21566T Operator's Manual

Adjusting the Handle Height

You may raise or lower the handle to a position comfortable for you.
To adjust the handle height, do the following:
1. Lower the handle; refer to
2. On both sides of the machine, remove the handle bumper and adjust the position of the carriage bolt to
the upper (high handle height) or lower (lower handle height) position
3. Secure the handle bumpers and raise the handle.
1. Upper handle height position
Folding the Handle (page
Figure 13
18
26).
(Figure
2. Lower handle height position
13).
g378111
g370601