Table of Contents
Advertisement
3-11 Removing the System from the Cabinet
Read the following guidelines before you begin to remove the system from the cabinet:
• Always turn off the computer and unplug the power cord from the power outlet before removing
the system from the cabinet.
• Disconnect all necessary cable connections.
• A Lift Table is required. Place the system unit on Lift Table.
• Two Person lift required. Firmly hold the bottom of the system when required to lift and carry the
system.
• Failure to observe these warnings could result in personal injury or damage to the equipment.
Follow these instructions to remove the system from the cabinet:
1.
Loosen the thumbnail screws on each side that secure the system.
2.
Carefully pull out the system from the cabinet and stop at the security hook on the side of the
system.
3.
Push the button to unlock.
4.
Gently pull out the system from the cabinet and place it on Lift table.
1
1
2
3
4
System Hardware Installation
1
1
3
- 39 -
Advertisement
Table of Contents
