Removing And Installing The Chassis Cover - Gigabyte R283-S95-AAH1 User Manual
Rack server - 4th/5th gen intel xeon scalable 2u dp 12+2-bay sata/sas lite (aah1), dual 1300w 80 plus titanium redundant power supply(aah1), 2u dp 12+2-bay nvme/sata/sas lite (aav1), 1+1 1600w 80 plus titanium redundant power supplies (aav1)
Table of Contents
Advertisement
3-1
Removing and Installing the Chassis Cover
Before you remove or install the system cover
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove the chassis cover:
1.
Remove the screw securing the chassis cover.
2.
Unlock the plastic handle and pull the grip handle to open the panel cover.
3.
Slide the cover cover to the rear of the system and then remove the cover in the direction indicated
by the arrow.
4.
To reinstall the chassis cover follow steps 1-4 in reverse order.
1
System Hardware Installation
- 28 -
4
3
2
Advertisement
Table of Contents
