Removing And Installing The Gpu Tray - Gigabyte G593-SD2-AAX1 User Manual

3-2

Removing and Installing the GPU Tray

Before you remove or install the GPU tray:
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove/install the GPU tray:
1. Loosen the top thumbnail screw securing the handles on both sides of the system.
2. Pull the grip handles on both sides of the system slide the tray to the front of the system at the
same time to remove the tray.
3. Follow steps 1-2 in reverse order to re-install the GPU tray.
1
System in the cabinet
1. Loosen the thumbnail screws securing the handles on both sides of the system.
2. Pull the grip handles on both sides of the system slide the tray to the front of the system at the
same time to remove the tray.
3. Follow steps 1-2 in reverse order to re-install the GPU tray.
1
1
2
2
1
1
2
2
System Hardware Installation
1
- 26 -