Rock cliff 6-piece steel woven sectional set- left/right arm loveseat (27 pages)
Summary of Contents for HAMPTON BAY FBS80022-BARE
Page 1
THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this chaise. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Table of Contents Table of Contents ............2 Pre-Assembly ..............3 Planning Assembly ..............3 Important Safety Instructions ........2 Hardware Included ..............Save These Instructions ............2 Package Contents ..............Read All Instructions Before Use ..........2 Assembly ................
Warranty 3 YEAR FRAME LIMITED WARRANTY WHAT IS COVERED We warrant the frames to be free of manufacturing defects to the original purchaser for three years . WHAT IS NOT COVERED It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover commercial use, hardware, acts of nature, fire, freezing and abusive use.
Assembly CONNECTING THE CHAISE SEAT TO THE CHAISE BACK Connect the chaise seat (C) to the chaise back (D) using M6x25 combination bolts (BB) and plastic washers (DD). Do not fully tighten the bolts at this step. HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance...
Page 6
Assembly (continued) CONNECTING THE CHAISE SEAT AND THE CONNECTION BAR TO THE LEFT ARM Place the left arm (B) on a soft surface, and attach the chaise seat (C) to the left arm (B) using M6x45 combination bolts (CC) and plastic washers (DD), as shown below. Attach the connection bar (E) to the left arm (B) using an M6x20 combination bolt (AA) and M6x45 combination bolt (CC).
Page 7
Assembly (continued) CONNECTING THE CHAISE SEAT AND THE CONNECTION BAR TO THE RIGHT ARM Place the right arm (A) on a soft surface. Attach the chaise seat (C) to the right arm (A) using M6x45 combination bolts (CC) and plastic washers (DD), as shown below. Attach the connection bar (E) to the right arm (A) using an M6x20 combination bolt (AA) and M6x45 combination bolt (CC).
Assembly (continued) TIGHTENING THE BOLTS Once all of the bolts are in place, fully tighten the bolts. Turn the chaise right side up. Ensure all connections are secure before use. Place the cushion (F) to finish the assembly of the chaise. Care and Cleaning For best results, clean the chaise with a damp cloth and dry thoroughly.
Page 9
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use. Factory chaise ID # FBS80022...