Replacing The Solid-State Drive - Lenovo ThinkPad X1 Carbon User Manual

3. Remove the screws
cover 3 .
4. Reinstall the new base cover
5. Turn the computer over again. Connect the ac power adapter and all cables.

Replacing the solid-state drive

Before you start, print these instructions.
Note: Depending on the model, your computer might look slightly different from the illustrations in this topic.
Attention: The solid-state drive is very sensitive. Incorrect handling can cause damage and permanent loss
of data. Observe the following guidelines:
80
ThinkPad X1 Carbon User Guide
1 and loosen the screws
1 , tighten the screws
2 that secure the base cover. Then remove the base
2 , and then reinstall the screws 3 .