Advertisement
Quick Links
Signature Tower Speakers
HFF/HFFW
Quick Start Guide
Outrigger Setup
Top
Bottom
Step One
• Ensure both outriggers are facing inwards on the
bottom of the speaker.
Step Two
• Thread the screws through the small thick washers,
followed by the large thin washers.
• Then thread the screws and washers through the
outriggers, and into the bottom of the speaker.
• Take the grooved floorspike and thread it through
the outriggers from the top.
• Then take the grooved floorspike washer and
thread it through the floorspikes bolts, from the
bottom of the outriggers.
• Thread the floorspikes bottoms into the floorspikes
bolts from the bottom of the outriggers.
Step Three
• Adjust the floorspikes/floorspike washers to help
level the speaker.
If you require further assistance please consult the manual: fluance.com/support
Advertisement
Related Manuals for Fluance HFF
Summary of Contents for Fluance HFF
- Page 1 • Thread the floorspikes bottoms into the floorspikes bolts from the bottom of the outriggers. Step Three • Adjust the floorspikes/floorspike washers to help level the speaker. If you require further assistance please consult the manual: fluance.com/support...
- Page 2 Fluance gives the following warranty to the original customer of each new Fluance product purchased from a dealer authorized by Fluance. Fluance warrants that each new product, under normal use, is free from defects, subject to the terms and conditions set forth. If a defect should occur within the warranty period, repairs will be made free of charge for parts and labor when such defects are determined by us to be attribut- able to faulty materials or workmanship at time of manufacture.