Installing The Mounting Bracket; Attaching The Fan Blades - Modern Forms Aura Installation Instructions Manual

2. Installing the Mounting Bracket

Remember to turn off power at the breaker.
Follow the steps below to hang your fan properly:
1. Disconnect power at the breaker to the fan location.
2. Remove 1 of 2 screws from the bottom of mounting bracket and
save for use in Finishing the Installation section. Loosen the other
screw (Fig. 2).
3. Pass the 120-volt supply wires through the center hole in the
ceiling mounting bracket as shown in (Fig. 2A).
4. Secure the mounting bracket to the ceiling outlet box with the
screws and washers provided with your outlet box (Fig. 2A).

3. Attaching the Fan Blades

Insert blades into decorative blade bracket slot. Attach the
1.
fan blades to the blade bracket using the included screws.
Repeat for remaining blades. Use Hardware B
2. Attach the clear blade holder ring to the blade
holder adapter. Use Hardware C
3. Take the assembled clear central ring and blade holder adapter
and flip it 180 degrees. Now attach this assembly to the motor
housing using the provided screws. Use Hardware D
(Fig. 3B)
12 Aura Instructions
(Fig. 3)
(Fig. 3A)
FR-W2303-72L