Samsung WW1 M8 Series User Manual page 38

Operations
05 Spin
06 Options
07 Delay End
08 Bubble Soak
09 Smart Control
38 English
Press to change the spinning speed for the current cycle. The
revolutions per minute (RPM) differs with the model.
• Rinse Hold : The final rinse process is suspended so that the
laundry remains in the water. To unload the laundry, run a
drain or spin process.
- To use the Rinse Hold option, press
the Rinse Hold (
• No Spin : The drum does not rotate after the final drain
process.
- To use the No Spin option, press
No Spin ( ) indicator turns on.
• Spin Only : To run the Spin Only cycle, press
seconds. When the cycle time and spinning speed appear, press
Spin repeatedly until a desired spinning speed is selected.
Then, press and hold
cycle. The spinning time depends on the selected cycle.
Press to select the options. Availability of the options depends on
the cycle.
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine's internal logic. For example, this setting is useful
for programming your machine to finish a wash at the time you
normally return home from work.
• Press to choose a preset unit of hours.
Press to activate/deactivate the Bubble Soak function. This
function helps remove a wide variety of stubborn stains.
• Bubble Soak helps remove a variety of stubborn stains.
• With Bubble Soak selected, laundry is thoroughly soaked in
water bubbles for effective washing.
• Bubble Soak is available with and adds up to 30 minutes to
these cycles:
COTTON,
SUPER SPEED.
Press to activate/deactivate the Smart Control function. When the
Smart Control function is activated, you can control your washing
machine using your mobile device. For more information, see the
SmartThings section on page 49.
Spin repeatedly until
) indicator turns on.
Spin repeatedly until the
Start/Pause (Hold to Start) to start the
SYNTHETICS,
Spin for 3
BEDDING, and