Related Manuals for Samsung AR AY5Y Series
Summary of Contents for Samsung AR AY5Y Series
- Page 1 Air conditioner User manual AR**AY5Y*** • Thank you for purchasing this Samsung air conditioner. • Before operating this unit, please read this user manual carefully and retain it for future reference.
-
Page 2: Table Of Contents
Contents Safety Information Safety Information At a Glance Indoor Unit Overview Display Remote Control Overview Replacing the remote control batteries Remote Control Operation Selecting an operation mode To set the temperature • To adjust the fan speed • To adjust the airflow direction Smart Features Power Smart Features AI Auto mode... - Page 3 This product and its electronic accessories should not be mixed with other commercial wastes for disposal. For more information on safe disposal and recycling, visit our website www.samsung.com/in/support or contact our Helpline numbers - 1800 40 SAMSUNG (1800 40 7267864) 1800 5 SAMSUNG (1800 5 7267864).
-
Page 4: Safety Information
Incorrect installation, use, or maintenance of this appliance can result in death, serious injury, or property damage. Keep these instructions with this appliance. This manual is subject to change. For the latest version, visit www.samsung.com. Because the instructions in this manual cover various models, the characteristics of your air conditioner may differ slightly from those described. - Page 5 WARNING: Low burning velocity material (This appliance is filled with R-32.) The user and installer guides should be read carefully. The user and installer guides should be read carefully. The service guide should be read carefully. FOR GENERAL This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Page 6 Safety Information Fix the outdoor unit firmly so that the electric part of the outdoor unit is not exposed. • Failing to do so may result in electric shock, fire, explosion, or problems with the product. Do not install this appliance near a heater, or inflammable material. Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (or rain).
- Page 7 FOR POWER SUPPLY WARNING When the circuit breaker is damaged, contact your nearest service centre. Do not pull or excessively bend the power line. Do not twist or tie the power line. Do not hook the power line over a metal object, place a heavy object on the power line, insert the power line between objects, or push the power line into the space behind the appliance.
- Page 8 • Since this may be dangerous due to a lack of oxygen, open a window at least once an hour. Do not use means to accelerate the defrost operation or to clean, other than those recommended by Samsung. Do not pierce or burn.
- Page 9 CAUTION Do not place objects or devices under the indoor unit. • Water dripping from the indoor unit may result in fire or property damage. Check that the installation frame of the outdoor unit is not broken at least once a year. •...
- Page 10 Safety Information Do not touch the pipes connected with the product. • This may result in burns or injury. Do not cut or burn the refrigerant container or pipings. Do not point the air direction to the fireplace or heater. Do not use this air conditioner to preserve precision equipment, food, animals, plants or cosmetics, or for any other unusual purposes.
-
Page 11: At A Glance
Indoor Unit Overview The appearance of the actual product may differ slightly from the image below. 01 Air intake 07 Power button/Remote control receiver 02 Air filter 08 Room temperature sensor 03 Tri-care filter 09 Display 04 Front panel NOTE 05 Airflow blade (up and down) •... -
Page 12: Display
Indoor Unit Overview Display 01 Temperature indicator (numeric) Filter reset indicator ( Electricity consumption indicator (numeric) Auto clean indicator ( 02 AI Auto indicator 03 Timer indicator good’sleep indicator 04 Wi-Fi indicator 03 04 NOTE • If the Wi-Fi indicator blinks for 10 seconds when operation starts, it means that the air conditioner is not connected to Wi-Fi. -
Page 13: Remote Control Overview
Remote Control Overview Most operating instructions in this manual require using the remote control. 01 Set temperature indicator 02 Timer option indicator 03 Operation mode indicator 04 Options indicator 05 Low battery indicator 06 Transmit indicator 07 Fan speed indicator 08 Vertical air swing indicator 09 Horizontal air swing indicator 10 Power button... -
Page 14: Remote Control Operation
Remote Control Operation Remote Control Operation You can use the air conditioner easily by selecting a mode and then by controlling the temperature, fan speed, and air direction. Selecting an operation mode To change the current mode between Auto, Cool, Dry, and Fan, press (Mode) button. -
Page 15: To Set The Temperature • To Adjust The Fan Speed • To Adjust The Airflow Direction
To set the temperature To control the temperature in each mode, press the (Temperature) button: Mode Temperature control AI Auto/Auto/Cool No temperature control. To adjust the fan speed Select from the following fan speeds in each mode: Mode Available fan speeds AI Auto/Auto/Dry (Auto) Cool... -
Page 16: Smart Features
Power Smart Features Power Smart Features AI Auto mode Use AI Auto mode to automatically operate any of Cool, Dry modes depending on the learned user patterns gathered from an external server via Wi-Fi module. The favourite temperature and operation mode are also set based on the current temperatures (indoor/ outdoor) and the gathered user patterns. -
Page 17: Auto Mode • Cool Mode
Auto mode Use Auto mode to perform the powerful cooling function to automatically reach the desired temperature. When the difference between the room temperature and the set temperature decreases, the air conditioner controls the fan speed and airflow direction. Select Auto. NOTE •... -
Page 18: Dry Mode • Fan Mode
Power Smart Features Dry mode Use Dry mode in rainy or humid weather. Select Dry. NOTE • The proper set temperature range for dehumidifying operation is a lower set temperature. Fan mode Use Fan mode to run the air conditioner like a floor fan, providing a breeze without cooling. -
Page 19: Variety Smart Features
Variety Smart Features Fast function Use the Fast function to quickly cool your room. This function is the most powerful cooling function provided by the air conditioner. You can select this function in Cool mode. In Cool mode NOTE • You can change the airflow direction, but you cannot change the set temperature and the fan speed. -
Page 20: Step Cooling Function • Quiet Function
Variety Smart Features 5 Step Cooling function Use the 5 Step Cooling function to adjust the cooling speed by changing the operation rate of the outdoor unit. In Cool mode NOTE • Each time you press the button in Cool mode, you can adjust the operation rate of the outdoor unit in 5 steps. -
Page 21: Electricity Consumption Check • Beep Function
Electricity consumption check Use the Usage function to check the amount of electricity consumed by using the air conditioner. The amount consumed is displayed on the indoor unit display for a few seconds, and the set temperature appears. In operation Select Usage. -
Page 22: Auto Clean Function
Variety Smart Features Auto clean function Use the Auto clean function if the indoor unit produces odors. Activating Auto clean To activate Auto clean, press the (Options) button for at least 3 seconds. The indoor unit display shows: If the air conditioner is off, Auto clean starts immediately. If the air conditioner is running, Auto clean starts as soon as the air conditioner turns off. -
Page 23: Display Lighting Function
Canceling Auto clean To cancel Auto clean while it is running, follow the procedure below: Press and hold for 3 or more seconds. Select Clean. NOTE • Canceling Auto clean does not deactivate it. Deactivating Auto clean To deactivate Auto clean, follow the procedure below while the air conditioner is in operation or turned off: Select Clean. -
Page 24: Wi-Fi Function (Smartthings App)
Variety Smart Features Wi-Fi function (SmartThings app) Turn on the Wi-Fi function to pair your smartphone with the air conditioner. Press and hold for 5 or more seconds. NOTE • When you turn on the Wi-Fi function, your smartphone pairs with the air conditioner, the (Transmit) indicator blinks, and appears on the remote control display for a few seconds. -
Page 25: Time Scheduling
Time Scheduling Timed on/ Timed off function Use the Timed on/off function to turn the air conditioner on or off after a duration. Scheduling durations before the air conditioner turns on or off helps use the air conditioner economically. Select On or Off (Set the duration.) NOTE •... -
Page 26: Good'sleep Function
Time Scheduling good'sleep function Use the good'sleep function to save energy while you are sleeping. You can select this function in Cool mode. In Cool mode (Select (Set the duration.) NOTE • To cancel the good'sleep function, set the duration to 0.0. •... - Page 27 Schedule Task How often By whom Instruction Run the Auto clean "Auto clean function" on As needed Owner function. page 22. "Cleaning the filter" on page Clean the filter. Once every two weeks Owner Replace the Tri-care "Replacing the Tri-care filter" Once every 3 years Owner filter.
- Page 28 Cleaning Cleaning the outside of the indoor unit 1 Turn off the air conditioner and wait until the fan stops. 2 Disconnect the power supply. 3 Use a soft brush or tepid damp cloth to clean the exterior. Soft brush Tepid damp cloth WARNING •...
- Page 29 Cleaning the filter Clean the air filter every two weeks or when the (filter-cleaning reminder) appears on the indoor unit display. The time between cleanings may vary, depending on the usage and environmental conditions. Vacuum cleaner Soft brush 30 minutes Mild detergent 1 Slide the filter off of the unit.
- Page 30 Cleaning Replacing the Tri-care filter Replace Tri-care filters once every three years. Replacement cycle may differ depending on the environment and usage time. Tri-care filter CAUTION • Do not clean the Tri-care filter with water. Failing to do so may result in damage to the filter. NOTE •...
- Page 31 Troubleshooting If the air conditioner is not operating normally, refer to the troubleshooting guide below. Problem Solution • Make sure the unit is receiving power. • Check the circuit breaker. If it is flipped off, flip it on again and The air conditioner stops restart the unit.
- Page 32 Troubleshooting Problem Solution • Replace the batteries in the remote control. • Make sure the remote control can send an unobstructed signal to The remote control does not the unit. work. • Keep bright lights away from the unit. Light from fluorescent bulbs or neon signs may interrupt the signal from the remote control.
- Page 33 Wi-Fi network Start. 3 Tap Log In. 1 Turn on the Wi-Fi access point. 4 If you have no Samsung account, tap Add 2 Tap Settings Wi-Fi on your smartphone. account to create your Samsung account. 3 Tap the Wi-Fi switch to activate it, and then 5 Log in to your Samsung account.
- Page 34 4 seconds. 2412 - 2472 MHz 20 dBm To notify that registration of the selected air conditioner to your Samsung account is in progress, Open Source Announcement (Transmit) indicator blinks for several seconds and appears on the remote control The software included in this product contains open display.
- Page 35 Category Function Description Set temperature Displays the set temperature. Monitoring Current temperature Displays the current temperature. Power Turns the air conditioner on or off. Mode Selects the desired operation. Temperature Adjusts the indoor set temperature. Fan Speed Sets the fan speed of operation mode. Wind direction Sets the fan directions of operation mode.
- Page 36 QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT 1800 40 SAMSUNG (1800 40 7267864) (Toll-Free) INDIA www.samsung.com/in/support 1800 5 SAMSUNG (1800 5 7267864) (Toll-Free) This product is RoHS compliant...