Table of Contents
Advertisement
4 Use your TV
This section helps you perform basic TV
operations.
Switch TV on or off
To switch on
•
Plug in the power plug.
» If the standby indicator is red, press
(Standby-On) on the remote control.
To switch to standby
•
Press
(Standby-On) on the remote
control.
» The standby indicator switches to red.
Tip
•
Though your TV consumes very little power when in
standby mode, energy continues to be consumed. When
not in use for an extended period of time, disconnect the
TV power cable from the power outlet.
Standby indicator
Switch channels
•
Press CH +/- on the remote control.
•
Enter a channel number using the numeric
buttons on the remote control.
•
Press
on the remote control to switch
and return to the previous channel.
View installed channel
You can view all available channels on the
channel list.
1
Press
LIST.
» The channel list appears.
2
Press
to select a channel and browse
the channel list.
3
Press OK to watch the selected channel.
4
Press
to switch to and resume the last
watched channel.
Watch connected devices
Note
•
Switch on the device before selecting it as an external
signal source.
LIST
EN
7
Advertisement
Table of Contents
