Watch Content On Connected Devices; Switch Channels - Philips 43PFT5853S/98 User Manual

on the remote control or
Switch the TV to standby if it is on.

Press on the remote control.The
"Standby" indicator is turned on.
Switch off the TV.

Press the on-off key of the TV to the OFF
state shown in the figure.The "standby"
indicator is turned off.
Tip

Though the TV consumes very little
power when in standby mode, energy
continues to be consumed. Disconnect
the TV power cable from the power
outlet when the TV is not used for an
extended period of time.
Watch content on connected
devices
Note

Switch on the device before selecting it as
an external source.
Use the Source button
1. Press SOURCES key.The source list
appears.
2. Press ▲/▼ key to select a device.
3. Press OK key.The TV switches to the
selected device.
key on the TV.
EN 8

Switch channels

Switch channels without Using Channel list:

CH+/CH-
Press
+/- key on the remote control.

Enter a channel number using the numeric
buttons on the remote control.

Press the (BACK) key on the remote
control to return to the previous channel.
Switch channels Using Channel list:
You can use the channel list to watch all available
channels.
1. Press OK key.The channel list appears.
2. Press ▲/▼ key to select a channel.
3. Press OK key to watch the selected
channel.
4. Press the (BACK) key to switch to the
previously watched channel.
key on the TV or channel