Table of Contents
Advertisement
Operating Procedures
Setting Menu
Table 9. HMI settings menu screens
Screen
User Interface
Chiller Control
Compressor
Setup
Safety
HMI
Configuration
30
The following tables shows the standard set of Setting
Menu screens.
Function
•
Admin Level Chiller SP Control
(see
"Special Functions," p.
32).
•
Display and adjust chiller PID
settings (see section 3.8
Compressor Control of the Chiller
Control manual).
•
Compressor staging control (see
"Special Functions," p.
32).
•
Evaporator / Condenser DP / flow
settings (if applicable).
•
Tonnage calculation configuration
(see
"Special Functions," p.
32).
•
Display and adjust compressor
specific parameters (see section
3.8 Compressor Control of the
Chiller Control manual).
•
See T3C Documentation for
specifics on the settings with the
exceptions:
Display and adjust safety parameters.
Note: The compressors have their own
safety settings for fault and
alarm. System should be
configured such that the
compressor settings have
priority.
Enable/Disable or select Special and
Optional Functionalities. Details for
each function are described in the
sections Special Functions and
Optional Functionalities.
Access
Main Menu > Settings Menu >
Control
Main Menu > Settings Menu > DTC
Main Menu > Settings Menu > Safety
Main Menu > Settings Menu > HMI
Admin access only.
ARTC-SVX007A-EN
Advertisement
Table of Contents
