Transmitter Solutions Dolphin DOLCWIUHF-ER-902 Manual page 14

INSTALLATION MANUAL
DOLCWIUHF-ER-902
UHF READER
27
Installation of UHF Card tags
Vehicles without metalized windshields allow the choice of one of the six positions shown on the figure below (A - F)to
install the UHF tag.
Vehicles with pre-configured metalized windshields should have a reserved area that is not metalized for RFID tags so
choose position B.
Card or cardholder
For optimum performance:
• Choose position A or F if the reader is located to the left of your vehicle.
• Choose position C or D if the reader is to the right of your vehicle.
• Choose position B or E if the antenna is in the overhead, above your vehicle
PLEASE NOTE : If your windshield is metalized, the read range of the reader will be affected. Please test the
read range before installing the UHF tag.
Reader
14
A
Steering wheel
F
TAG
TAG
B
C
Rearview mirror
E D
TAG
TAG
EN
Reader