Transmitter Solutions Dolphin DOLCWIUHF-ER-902 Manual page 13

INSTALLATION MANUAL
DOLCWIUHF-ER-902
UHF READER
25
Info
Menu
Info
26
Password
Menu
Password
The receiver manages 2 different passwords: ADMIN and SERVICE and their use can be activated or deactivated.
The receiver is supplied with the password disabled.
The 2 factory passwords are:
Password Admin = 11111,
Password Service = 00000.
By entering the Admin password Admin you are allowed to access the submenu that allows the activation,
deactivation and modification of passwords.
NOTE: By entering the Service password you can access the main menu but cannot make any password changes.
Incorrect Password: If you type an incorrect password 5 times, the ID number of the receiver appears on the display:
By pressing P3 again, an 8-digit unblocking code (PUK) is requested. To obtain the PUK code, send an email to
sales@transmittersolutions.com or call (866) 975-0101.Once the PUK code is set, the password returns to the factory
default value.
Displays the current setting for the output : Relay or Wiegand.
Info
• If the output is "Relay", specifies the operating mode set for the 2 relays
Output
• If the output is "Wiegand" the protocol in use : 26, 30 or 44 bits
Info
Shows the Number of Tags memorized out of the max available ( 7680 )
N. Tags
Info
Shows the number of Transmitter memorized out of 100
N. Tx
( max )
Tag
Shows the list of the tags and their memory position
List
( useful if you need to delete the list)
Tx
Shows the list of the transmitters and their memory position
List
( useful if you need to delete the list )
Info
Shows current Firmware version
Version
ADMIN
Password
SERVICE
Password
DISABLE
Passw.?
Exit
Password
www.erone.com - www.cdvigroup.com
EN
SYSTEM N
12345678
PUK
Password
13