5.6
Securing the burner to the boiler
Provide an adequate lifting system of the burner.
Boiler door must have a max. thickness of 100
mm, refractory lining included. If the thickness is
greater (max. 260 mm) a combustion head exten-
WARNING
sion should be used, to be requested separately.
5.6.1
Hinge installation
Install the hinge 4), supplied as standard, as shown in Fig. 9.
S7393
5.7
Positioning the probe - electrode
Respect the positions shown in Fig. 11.
WARNING
Probe
D5104
4
~
47 mm
Installation
➤ Separate the combustion head assembly from the burner
body by removing nut 1) and removing the group A)(Fig. 10).
➤ Fix the group B)(Fig. 10) to the boiler plate 2), inserting the
supplied insulating gasket 3).
The seal between burner and boiler must be
airtight.
WARNING
A
Fig. 9
Electrode
Diffuser
2.0 - 3.0 mm
15
GB
1
Probe
Electrode
3.7
=
3
2
D5096
B
Fig. 10
Fig. 11
20065248