System Setting; Event Log; Demo - Foster S4001 Instructions For Installation And Use Manual

With the oven on, select the icon
key to enter the SETTINGS menu. This menu permits setting
a number of parameters or special functions. It also permits
accessing the error events list.
1. Press the keys to select the sub menu and confirm with
the key.
SETUP
SERVICE
2. Use this menu to change the following settings:
Press the keys to select the item to be set or to be
displayed from among the three available ones and confirm
with the key.
SYSTEM
EVENT LOGS
MAIN VOLTAGE

DEMO

OM 15

Event Log

The menu permits checking any recorded errors. These codes
can be notified to the after-sales service.
EVENT LOGS
01 12/11/2015 07:06 CODE: F10305
02 17/11/2015 13:17 CODE: F10305
Demo
and confirm with the
The purpose of this function is to set the DEMO mode, which
makes the oven useless for cooking but automatically performs
a demonstration of functions.
1. Press the keys
2. Confirm with the
3. Press the
After about 30 seconds, the oven starts to operate in this mode.
To temporarily stop the DEMO function, simply keep any key
pressed for a few seconds until the oven switches to standby.
To start it again, press the
To disable the function, enter the DEMO display page and set
OFF. Confirm using the
NOTE: Once set, the function remains enabled even if the oven

7 - System Setting

to select the item ON.
key.
key.
key.
key.
is disconnected from the power mains.
DEMO
ON
EN
15