Change The Iot Wifi Password Or Security Level - NETGEAR SXK50 User Manual

Orbi Pro WiFi 6 AX5400 Router Model SXR50 and Orbi Pro WiFi 6 AX5400 Satellite Model SXS50
10. A WLAN schedule can turn WiFi broadcast off to block network access during days
and times when it is not needed and to save energy. To enable and configure a
WLAN schedule for the admin WiFi network, do the following:
a. Select the Enable WLAN schedule check box.
The page expands and shows the days and times that the WiFi signal is broadcast.
After you enable the WLAN schedule, by default, the WiFi signal is broadcast
every day from 8:30 a.m. to 6:00 p.m.
b. To change if the WiFi signal is broadcast during a day, clear or select the check
box for the day.
If you clear the check box for a day, the WiFi signal is not broadcast on that day.
c. To change when the WiFi signal is broadcast during a day, move the round icons
on the blue bar to the desired starting and ending times for the day.
The period that the WiFi signal is broadcast during that day displays to the left
of the blue bar.
11. Click the Apply button.
Your settings are saved. The router sends the new settings to the satellite.
12. Make sure that an IoT device can connect to the WiFi network with its new settings.
If you cannot connect using WiFi, check the following:
• Is your WiFi-enabled computer or mobile device connected to another WiFi
network in your area? Some WiFi devices automatically connect to the first open
network without WiFi security that they discover.
• Is your computer or mobile device trying to connect to your network with its old
settings (before you changed the settings)? If so, update the WiFi network
selection in your computer or WiFi device to match the current settings for your
network.

Change the IoT WiFi password or security level

You must be connected to the admin network to change the IoT password and security
level (authentication and encryption settings). The router supports Wi-Fi Protected
Access 3 (WPA3), WPA2, mixed WPA2 + WPA3, and mixed WPA + WPA2. The router
also supports enterprise level WPA3 and enterprise level WPA2.
The router web interface calls the IoT WiFi network the Wireless 3 network.
To change the IoT WiFi network password or security level:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi Pro network.
2. Enter orbilogin.com.
Manage the WiFi Networks 102 User Manual